Wall-Mounted Luxury Large Rectangular Marble Sinks – All Colors, Sizes and Uses

Wall-Mounted Luxury Large Rectangular Marble Sinks

Wall-mounted luxury large rectangular marble sinks combine a substantial natural-stone structure with a clean floating bathroom appearance. Instead of sitting on a vanity cabinet or countertop, these sinks are installed directly against a structurally suitable wall using a properly engineered support system.

Their long rectangular form provides a spacious washing area and creates a strong architectural feature in modern bathrooms, luxury villas, hotels, resorts, restaurants, spas, offices and commercial developments.

Each sink is manufactured from genuine Pakistani marble. The stone block or thick slab is selected, cut, shaped, hollowed, drilled, sanded and finished according to the approved design. The internal bowl is normally polished or honed for practical cleaning and water flow, while the outer surfaces can be polished, matte, fluted, chiseled, hammered or left with a controlled natural texture.

Wall-mounted marble sinks can be produced as single-bowl washbasins, double-bowl units, long trough sinks or integrated sink-and-countertop structures. Buyers can request customized drain locations, faucet holes, backsplashes, side panels, towel-rail openings and concealed support arrangements.

Pakistan Onyx Marble manufactures and exports wall-mounted rectangular marble sinks for importers, wholesalers, bathroom retailers, architects, interior designers, hotels, resorts, construction companies and property developers.

Because marble is a natural material, every sink contains individual veins, shades and mineral markings. No two marble washbasins will look exactly identical.

What Is a Wall-Mounted Marble Sink?

A wall-mounted marble sink is a bathroom washbasin installed directly against a wall without a full vanity cabinet underneath.

It may include:

• One integrated marble bowl
• Two separate washbasin bowls
• One long trough-style bowl
• A built-in marble countertop
• A raised backsplash
• Side splashes
• Faucet openings
• Drain openings
• Concealed support channels
• Openings for steel brackets
• Decorative side panels
• An integrated towel rail

The sink appears to float above the floor, creating a cleaner visual line and leaving the lower area open.

The wall and supporting framework must be suitable for the completed sink’s weight. Marble is significantly heavier than many ceramic or composite products, so the support system must be planned before manufacturing and installation.

Luxury Wall-Mounted Rectangular Sink Designs

Classic Wall-Mounted Rectangular Sink

A straight rectangular marble basin with a centered bowl and clean outer lines.

This design is suitable for:

• Modern residential bathrooms
• Guest washrooms
• Hotel rooms
• Powder rooms
• Office bathrooms
• Luxury commercial projects

The sink can be manufactured with polished, honed or textured exterior surfaces.

Large Floating Marble Washbasin

A wide rectangular sink is mounted directly against the wall to create a floating appearance.

The open space underneath can make the bathroom appear larger and can simplify floor cleaning.

Integrated Sink and Countertop

The bowl and surrounding marble counter are manufactured as one continuous structure.

The extended side areas can provide space for:

• Soap dispensers
• Toothbrush holders
• Hand towels
• Bathroom accessories
• Decorative objects

Single-Bowl Wall-Mounted Sink

One large bowl is positioned centrally or toward one side of the rectangular structure.

This option is suitable for residential bathrooms, powder rooms and hotel rooms.

Double-Bowl Wall-Mounted Sink

Two separate bowls are carved into one large marble structure.

Double-bowl designs are suitable for:

• Master bathrooms
• Hotel suites
• Shared bathrooms
• Double-faucet installations
• Residential development projects

Long Trough Marble Sink

One extended internal bowl runs across most of the sink length.

A trough sink may include one, two or more faucet positions depending on its size and intended use.

Offset-Bowl Rectangular Sink

The washbasin bowl is positioned toward one side, leaving a larger flat marble surface on the opposite side.

The wider platform can hold bathroom accessories or provide useful counter space.

Low-Profile Wall-Mounted Sink

A shallow rectangular structure creates a thin, modern floating appearance.

Low-profile bowls require accurate internal slopes and carefully selected faucets to reduce splashing.

Deep Wall-Mounted Marble Sink

A deeper internal bowl provides greater water containment.

This design increases the total weight and must be supported by a suitable wall-mounted framework.

Thick Architectural Sink

A substantial sink with thick walls, a broad rim and a heavy rectangular profile.

The larger marble surfaces highlight the stone’s natural veins and colors.

Thin-Edge Floating Sink

A refined contemporary sink with a thinner visible edge.

Thin marble sections should only be produced when the selected material and support design provide sufficient structural strength.

Soft-Corner Rectangular Sink

The overall shape remains rectangular, but the outside and internal corners are gently rounded.

This design is easier to clean than sinks with very sharp internal corners.

Sharp-Line Architectural Sink

Straight surfaces and clearly defined edges create a strong geometric appearance.

Sharp corners require careful packaging, handling and installation.

Fluted Wall-Mounted Marble Sink

Vertical grooves are carved into the front panel or side surfaces.

Fluting can be:

• Narrow
• Wide
• Deep
• Shallow
• Rounded
• Angular
• Full-height
• Partially applied

Chiseled Wall-Mounted Sink

The exterior front and side panels are hand-textured, while the bowl and upper surfaces remain polished or honed.

Rock-Face Floating Sink

The front surface resembles naturally split stone, creating a rustic and sculptural appearance.

Waterfall-Side Marble Sink

One or both outer sides extend downward to create vertical marble panels.

These side panels can conceal support hardware and create the appearance of a continuous marble structure.

Wall-Mounted Sink with Backsplash

A matching marble backsplash can be integrated into the sink or supplied as a separate piece.

Backsplash options may include:

• Low backsplash
• Medium backsplash
• Full-height backsplash
• Raised rear ledge
• Custom architectural wall panel

Wall-Mounted Sink with Towel Rail

A towel rail can be positioned beneath or in front of the sink.

The rail may be manufactured from metal or incorporated into a custom marble structure where technically suitable.

Custom Wall-Mounted Marble Sink

Customers can provide:

• Technical drawings
• CAD files
• Architectural plans
• Countertop layouts
• Reference photographs
• Physical templates
• Bowl dimensions
• Drain positions
• Faucet locations
• Support-system details

Final production should begin only after the dimensions and technical drawing are approved.

Available Pakistani Marble Colors

Wall-mounted luxury rectangular sinks can be manufactured in the following 12 Pakistani marble colors.

1. Ziarat White Marble

Ziarat White Marble features a white background with soft gray veins and natural markings.

It is suitable for minimalist, Scandinavian and luxury bathroom interiors. Its light color can make a large wall-mounted sink appear cleaner and visually lighter.

2. Black Zebra Marble

Black Zebra Marble has a dark background with bold white veins and contrasting natural patterns.

Its dramatic veining remains highly visible across large rectangular front panels and countertops.

3. Red Zebra Marble

Red Zebra Marble contains red, burgundy, brown, cream and white natural markings.

It is suitable for statement interiors where the sink is intended to become the main decorative bathroom feature.

4. Black and Gold Marble

Black and Gold Marble features a dark background with gold, bronze, beige and cream-colored veins.

It provides a premium appearance and pairs well with brass, gold-tone and matte-black faucets.

5. Jet Black Marble

Jet Black Marble offers a deep black appearance with a strong architectural character.

It can be highly polished for a glossy finish or honed for a softer contemporary look.

6. Teakwood Marble

Teakwood Marble contains warm brown, beige and cream-colored linear patterns resembling natural wood grain.

Its directional veins are especially attractive across long wall-mounted sinks and integrated vanity counters.

7. Ziarat Gray Marble

Ziarat Gray Marble contains soft to medium gray tones with lighter veins and natural shade variations.

It complements modern, neutral and industrial-style bathroom interiors.

8. Fossil Marble

Fossil Marble contains natural fossil-like forms, shell markings and organic patterns.

These details give every large wall-mounted sink an individual and naturally decorative appearance.

9. Verona Beige Marble

Verona Beige Marble has a warm beige background with subtle veins and natural tonal variation.

It is suitable for classic, Mediterranean, hotel and neutral residential bathrooms.

10. Armani Gray Marble

Armani Gray Marble features refined gray tones with lighter-colored veining.

It gives wall-mounted rectangular sinks a sophisticated and contemporary appearance.

11. Oceanic Marble

Oceanic Marble contains flowing gray, white and darker wave-like patterns.

Large rectangular sink surfaces provide space for the natural movement of the stone to remain clearly visible.

12. Botticina Cream Marble

Botticina Cream Marble has a soft cream or light beige background with delicate natural veins.

It provides a warm, elegant and timeless appearance for residential and hospitality projects.

Natural shade and vein variation should be expected. Similar-tone selection may be arranged for project orders where suitable material is available, but exact visual matching cannot be guaranteed.

Available Sink Sizes

Wall-mounted marble sinks can be manufactured in standard, large, extra-large and custom dimensions.

Sizes are generally stated as maximum outer length × width × height.

Standard Wall-Mounted Sizes

Common approximate dimensions include:

• 24 × 18 × 6 inches
• 28 × 18 × 7 inches
• 30 × 20 × 7 inches
• 32 × 20 × 8 inches
• 36 × 20 × 8 inches

Large Wall-Mounted Sink Sizes

Common approximate dimensions include:

• 36 × 22 × 8 inches
• 40 × 22 × 9 inches
• 42 × 24 × 9 inches
• 48 × 24 × 10 inches
• 54 × 24 × 10 inches

Extra-Large and Double-Bowl Sizes

Possible approximate dimensions include:

• 48 × 22 × 8 inches
• 54 × 24 × 9 inches
• 60 × 24 × 10 inches
• 72 × 24 × 10 inches
• Custom project dimensions

Large and extra-large sinks should be manufactured according to approved drawings because bowl placement, wall support, drainage and faucet spacing must be coordinated.

Custom Sink Measurements

Customers can specify:

• Overall length
• Overall width
• Overall height
• Internal bowl length
• Internal bowl width
• Internal bowl depth
• Countertop extension
• Backsplash height
• Side-panel dimensions
• Front-panel thickness
• Wall thickness
• Rim thickness
• Drain-hole position
• Faucet-hole position
• Distance between two bowls
• Distance between faucet openings
• Support-channel placement

Internal Bowl Designs

Single Centered Bowl

One basin is positioned centrally within the rectangular marble structure.

Offset Bowl

The bowl is moved toward one side to create additional counter space.

Double Bowl

Two separate washbasin bowls are carved into one long marble unit.

Long Trough Bowl

One extended internal bowl runs across the sink.

Rounded Rectangular Bowl

Soft internal corners improve cleaning while preserving a geometric appearance.

Sharp-Line Bowl

Defined internal corners create an architectural appearance but require careful shaping and cleaning.

Sloped-Bottom Bowl

The internal base slopes toward the drain to support water flow.

Flat Architectural Bowl

A broad internal floor uses controlled slopes toward the drain.

Flat-bottom designs require accurate manufacturing to reduce standing water.

Bowl Depth Options

Shallow Bowl

Approximate internal depth:

• 3 to 4 inches

Shallow designs create a thinner floating appearance but require careful faucet selection.

Standard Bowl

Approximate internal depth:

• 5 to 6 inches

This depth is suitable for many residential and hospitality installations.

Deep Bowl

Approximate internal depth:

• 7 to 9 inches

A deeper bowl improves water containment but adds weight and requires stronger wall support.

Faucet Configurations

Wall-mounted rectangular marble sinks can be manufactured for different faucet arrangements.

Wall-Mounted Faucets

Wall-mounted faucets keep the marble countertop clear and create a clean architectural appearance.

Deck-Mounted Faucet

A faucet opening can be drilled into the rear or side marble platform.

Single-Hole Faucet

One faucet hole is drilled according to the selected fitting.

Three-Hole Faucet

Separate openings are produced for the spout and controls.

Double-Faucet Configuration

Two faucet positions can be included for double-bowl or long trough sinks.

No Faucet Holes

The sink can be supplied without faucet openings for wall-mounted plumbing.

All hole diameters and positions should match the buyer’s final faucet specifications.

Drain and Overflow Options

Available drainage configurations include:

• One centered drain
• One offset drain
• Two separate drain openings
• Custom drain positions
• Standard drain-hole diameter
• Custom drain-hole diameter
• Internal slope toward each drain
• Overflow opening where technically suitable
• Concealed linear drainage where specifically designed

A commonly requested drain opening may be approximately 45 mm, but the final diameter must match the buyer’s selected fitting.

Exterior Finish Options

High-Polished Finish

A glossy surface enhances the marble’s natural colors, veins and reflective character.

Honed Matte Finish

A smooth, low-reflection finish provides a softer modern appearance.

Satin Finish

A gentle sheen creates a surface between polished and honed finishes.

Fluted Front Panel

Vertical grooves create architectural texture on the visible front surface.

Ribbed Exterior

Repeated horizontal or vertical lines add decorative depth.

Full Chiseled Exterior

The front and side panels are manually textured.

Soft-Chiseled Finish

Shallow tool markings create subtle handcrafted character.

Deep-Chiseled Finish

Pronounced cuts produce a rugged natural-stone appearance.

Rock-Face Finish

The exterior resembles naturally split marble.

Rough and Polished Combination

The bowl and upper surfaces remain polished while the front and side panels are textured.

Polished Ridges with Honed Grooves

Raised fluted sections are polished while the recessed grooves remain matte.

Rim and Edge Options

Available rim and edge profiles include:

• Straight polished edge
• Rounded edge
• Soft bullnose edge
• Full bullnose edge
• Beveled edge
• Chamfered edge
• Thick architectural edge
• Thin refined edge
• Waterfall side edge
• Rough chiseled front edge
• Custom edge profile

The selected edge should be suitable for the sink thickness, wall support and intended use.

Wall Support and Installation Requirements

Wall-mounted marble sinks are heavy and require a professionally designed support system.

The installation may use:

• Structural steel brackets
• Concealed metal frames
• Reinforced wall channels
• Floor-to-wall support frames
• Stone-supporting ledges
• Side-wall support
• Custom engineered brackets
• Cabinet-supported hidden frameworks

The appropriate system depends on:

• Sink dimensions
• Total product weight
• Wall construction
• Number of bowls
• Countertop projection
• Backsplash design
• Faucet arrangement
• Local construction standards

Standard lightweight wall anchors are not suitable for large marble sinks.

The support structure should be designed or approved by a qualified architect, engineer or experienced installer before installation.

The actual finished sink should be measured before drilling support points or finalizing plumbing connections.

Uses of Wall-Mounted Large Marble Sinks

Luxury Residential Bathrooms

These sinks are suitable for villas, apartments, master bathrooms, guest bathrooms and powder rooms.

Hotels and Resorts

They can be installed in hotel guest rooms, luxury suites, resort villas, reception washrooms and spa bathrooms.

Double Vanity Areas

Long wall-mounted sinks can provide one or two washing positions for shared bathrooms.

Restaurants and Cafés

A large marble floating sink can create a distinctive feature in premium restaurant washrooms.

Spas and Wellness Centers

Natural marble complements treatment rooms, salons, wellness centers and resort facilities.

Offices and Commercial Buildings

Wall-mounted rectangular sinks can be used in executive offices, clubs, showrooms and luxury commercial properties.

Accessible and Open-Floor Designs

The open area below the sink may support specific accessible or easy-cleaning bathroom layouts when designed according to applicable project requirements.

Modern Architectural Interiors

Floating marble sinks combine well with large mirrors, wall-mounted faucets, minimalist lighting and clean wall surfaces.

Advantages of Wall-Mounted Marble Sinks

• Clean floating appearance
• Open floor area below the sink
• Large and practical washing surface
• Single, double or trough-bowl options
• Integrated countertop space
• Custom faucet and drain positions
• Natural marble colors and veins
• Multiple exterior finishes
• Suitable for modern and luxury interiors
• Available for residential and commercial projects
• Custom dimensions can be manufactured
• Private-label and wholesale production available

Custom Manufacturing Options

Pakistan Onyx Marble can manufacture wall-mounted rectangular sinks with:

• Custom Pakistani marble color
• Custom overall length, width and height
• Single, double or trough bowl
• Custom internal bowl dimensions
• Custom bowl depth
• Custom countertop extensions
• Custom backsplash
• Side splashes
• Waterfall side panels
• Custom faucet-hole positions
• Custom drain configuration
• Concealed support openings
• Steel-bracket channels
• Fluted, ribbed or chiseled exterior
• Polished, honed or satin surfaces
• Thick, thin, rounded or beveled edges
• Logo or brand-name engraving
• Private-label production
• Project identification labels
• Reinforced wooden export crates

Handmade Manufacturing Process

Each wall-mounted rectangular marble sink passes through several manufacturing stages:

1. Pakistani marble block or slab selection
2. Initial cutting
3. Rectangular exterior shaping
4. Internal bowl hollowing
5. Bowl-depth formation
6. Drain-hole drilling
7. Faucet-hole drilling where required
8. Internal drainage-slope formation
9. Backsplash or side-panel production
10. Support-channel preparation
11. Edge and rim shaping
12. Exterior carving or texturing
13. Internal sanding
14. Polishing or honing
15. Base and wall-contact leveling
16. Water-flow inspection
17. Final quality control
18. Protective export packaging

Quality-Control Inspection

Before packing, each sink may be checked for:

• Approved outer dimensions
• Internal bowl measurements
• Bowl depth
• Wall and rim thickness
• Drain-hole diameter
• Drain-hole location
• Faucet-hole location
• Distance between two bowls
• Water-flow direction
• Wall-contact alignment
• Support-channel position
• Edge quality
• Exterior finish
• Internal polish
• Structural cracks
• Weak or thin sections
• Final cleanliness
• Packaging protection

Project orders should be manufactured according to signed technical drawings and agreed dimensional tolerances.

Matching Marble Bathroom Products

Wall-mounted marble sinks can be supplied with matching products such as:

• Marble backsplashes
• Side splashes
• Vanity shelves
• Wall panels
• Soap dishes
• Toothbrush holders
• Bathroom trays
• Tissue boxes
• Lotion dispensers
• Waste bins
• Bathroom accessory sets
• Marble wall cladding
• Marble floor tiles

Matching items can be produced in the same marble color, although natural veins and shades will vary.

Export Packaging

Large wall-mounted marble sinks require reinforced packaging due to their weight, length and edges.

Packaging may include:

• EPE foam wrapping
• Thermocol protection
• Bubble wrapping
• Edge and corner guards
• Drain-opening protection
• Foam-lined cartons
• Internal wooden supports
• Reinforced wooden crates
• Full-base support
• Palletized packaging
• Handling labels
• Orientation markings
• Product identification
• Private-label packaging

Long sinks and double-bowl units may require customized crates with continuous support beneath the full structure.

Manufacturer and Exporter – Pakistan Onyx Marble

Pakistan Onyx Marble manufactures and exports wall-mounted luxury large rectangular marble sinks for:

• Importers
• Wholesalers
• Bathroom retailers
• Natural-stone distributors
• Architects
• Interior designers
• Hotels
• Resorts
• Restaurants
• Spas
• Construction companies
• Property developers
• Home décor brands
• Commercial projects

Orders can be manufactured in one Pakistani marble color or in mixed-color selections.

Customers should provide the required marble, outer dimensions, bowl configuration, drain locations, faucet specifications, support details, finish, quantity and packaging requirements for a customized quotation.

Information Required for a Quotation

Customers should provide:

• Preferred marble color
• Overall sink dimensions
• Number of bowls
• Internal bowl dimensions
• Required bowl depth
• Drain-hole diameter and position
• Faucet-hole requirements
• Backsplash dimensions
• Side-panel requirements
• Wall construction information
• Proposed support system
• Exterior finish
• Interior finish
• Required quantity
• Packaging requirements
• Destination country
• Technical drawing or reference image

Complete technical specifications reduce manufacturing and installation risks.

Product Care Instructions

Clean the sink using clean water, a soft cloth and a pH-neutral natural-stone cleaner.

A soft brush may be used to clean fluted, ribbed or chiseled surfaces.

Avoid:

• Acidic cleaners
• Vinegar
• Lemon-based products
• Bleach
• Harsh bathroom chemicals
• Abrasive powders
• Metal scrubbers
• Rough cleaning pads
• Sharp tools

Wipe away soap, toothpaste, cosmetics, oils, hair dye and colored liquids promptly.

Marble may require periodic sealing depending on its color, finish, usage and local water conditions.

Do not leave standing water around wall joints or supporting areas for extended periods.

Frequently Asked Questions

Can large marble sinks be mounted directly on a wall?

Yes, but they require a structurally suitable wall and a properly engineered metal or stone support system.

Can you manufacture double-bowl wall-mounted sinks?

Yes. Large rectangular units can include two separate bowls or one long trough bowl.

Can the sink include an integrated countertop?

Yes. Flat marble platforms can be added beside or around the washbasin bowl.

Can faucet holes be customized?

Yes. Single, double or three-hole configurations can be produced according to approved specifications.

Can the drain positions be customized?

Yes. Drains can be centered, offset or positioned separately for double-bowl designs.

Are all Pakistani marble colors available?

The sinks can be manufactured in Ziarat White, Black Zebra, Red Zebra, Black and Gold, Jet Black, Teakwood, Ziarat Gray, Fossil, Verona Beige, Armani Gray, Oceanic and Botticina Cream Marble, subject to material availability.

Can the front panel be fluted or chiseled?

Yes. Polished, honed, fluted, ribbed, hammered, chiseled and rock-face finishes are available.

Are wall-mounted marble sinks suitable for hotels?

Yes. They are suitable for villas, hotels, resorts, restaurants, spas and commercial bathroom projects.

Is installation hardware included?

Support hardware should be designed according to the sink weight, dimensions and wall construction. Any requested hardware must be confirmed separately before production.